Data Acquisition (DAQ) and Control from Microstar Laboratories

Download Configuration Software

data acquisition filtering data acquisition software channel architecture enclosures services

Download software for your Signal Interface (SI) module

Signal Interface (SI) modules provide isolation for DAP board systems. To configure these modules, download the software here.

Modules that require this configuration software include the following.

  • MSXB 085: Isolated Analog Input and Output Signal Interface Modules
  • MSXB 084: Isolated Analog Input Signal Interface Modules
  • MSXB 078: Isolated Digital Signal Interface Modules
  • MSXB 086: Isolated 4-20 mA Input Signal Interface Modules
  • MSXB 074: Channel-to-Channel Isolated 4-20 mA Current Loop Output Signal Interface Modules
  • MSXB 080: Channel-to-Channel Isolated Analog Input Signal Interface Modules
  • MSXB 076: Channel-to-Channel Isolated 16-Bit Analog Output Signal Interface Modules, Eight Channels per Module
  • MSXB 075: Channel-to-Channel Isolated 16-Bit Analog Output Signal Interface Modules, Four Channels per Module

Please enter your information. (Name, Company, and Email are required.)

First Name:

Last Name:

Company:

Email:

Telephone:

Download Configuration Software (1.33MB). Then unzip all files to a single directory.

Download the TWOWRITE module (88kB).

 

TWOWRITE encodes a merged stream of raw data into the two-write protocol format. Each single data word becomes two sequential data words containing the output port, raw data, and sequence information. This data is sent to the DAP's digital output and is interpreted by an appropriate signal interface module that is addressed to one of the port addresses in <PortVec>.

   

See our Privacy Policy to learn where your data goes when you click Submit.