Data Acquisition (DAQ) and Control from Microstar Laboratories

Knowledge Base: Connectors

  • See the list of other topics for category Connectors

Q10090 DB9 for analog outputs

Tags: Help, analog outputs

Applies to: MSXB056, accessory boards with DB9 connector

I have a board with a DB9 connector for I/O. How should I connect to it?

Male (plug) DB9 connectors are used primarily for analog outputs on our output expansion boards. They are subminiature D connectors with 9 pins in two rows. They mate with female (receptable, socket) DB9 connectors on connecting cables.

Related Products and Pinout

  1. MSXB056 - Analog Output Expansion Board

    The male DB9 connector is used on the following models of the MSXB056:

    • MSXB056-03-C3Z - stand-alone model for 4 analog outputs

    Figures 1a and 1b show the pinout of the male DB9 connector on the MSXB056, with the corresponding connections on the female connector on the cable.

  2. The DB9 male connector is part number 788754-2 frmo AMP / Tyco. The pins at the same row have a spacing of 2.77 mm. The spacing between the two rows is 2.84mm. The gold contact pins have a thickness of 0.38 micrometer (0.000015").


MSXB056 Manual

Model number suffix

Note: Information on this page was collected from multiple sources. If you have any concerns about the accuracy of the information provided here, check the hardware manuals for your specific products. Those manuals are the authoritative sources.