Data Acquisition (DAQ) and Control from Microstar Laboratories

Isolated 16-Bit Analog Outputs: MSXB 076

data acquisition filtering data acquisition software channel architecture enclosures services

When you need isolated analog outputs

click to view MSXB076 photo


DAP 5216a

DAP 5200a

DAP 5016a

DAP 5000a

DAP 4000a


MSXB 076 PDF Manual

Configuration Software Manual

Configuration Software

The Microstar Laboratories Isolated 16-Bit Analog Output Signal Interface Module, part number MSXB 076, provides isolated analog outputs for Data Acquisition Processor (DAP) systems. Use these modules to eliminate ground currents – a potential source of noise in your measurement and control signals – as well as to eliminate phase errors from analog outputs in your application.

MSXB 076 includes eight single-ended analog outputs, with an isolated ground for each output, and features simultaneous updating for multiple modules, across all channels. MSXB 076 offers high signal density and enables high channel counts.

Microstar Laboratories Channel Architecture allows 8 or more MSXB 076 modules to connect to a single DAP board to provide isolated analog output at a low cost per channel. Contact applications engineering at Microstar Laboratories for higher channel count systems.

The Isolated Analog Output Signal Interface Modules connect to the Data Acquisition Processor's digital connector. If digital input/output is needed in addition to analog output expansion, a Digital Signal Interface Module is required.

There are several cabling options for the MSXB 076 Analog Output Signal Interface Module. The module may be connected to a DAP using various 100-line cabling options, or can be installed into a Digital Backplane.

Industrial Enclosure compatible models

  • MSXB 076-01-E3E8-B: 8 insulated BNC connectors
  • MSXB 076-01-E3K-F: female DB-37 connector
  • Other panel options are available.

Stand-Alone and Single-Board-Enclosure models

Channel-to-Channel Isolation – MSXB076

analog output isolation diagram