Output Triggering Technology
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|||||||||||||||
|
| | | | |
||||||||||||||||||
Gated Triggering with Single-Channel Updating
This configuration allows an external logic signal to temporarily suspend and reactivate updating. When active, analog output values are updated according to the internal clock.
Related |
|---|
|
Set up your triggering and timing commands using DAPstudio software. |
Notes:
- Clocking can start when trigger is held active high at least
tTrigMin - Clocking activity begins
tTCsetupafter triggering goes active - Data must be fetched from buffer and stable at converter before clocking
- Updates are latched into the converter at clocked intervals
TIME - Analog output values stabilize after settling transient
- Clocking activity is suspended when the trigger level goes inactive low
- Lower the trigger level within
tTrigMaxto exclude the next clock - Updating can resume after the trigger level again goes active high